1c31ca5da9
Replace blanks with tabs Remove whitespace from otherwise empty lines Signed-off-by: Felix Baumann <felix.bau@gmx.de>
520 lines
8.2 KiB
Plaintext
520 lines
8.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "Linksys WHW03 V2 (Velop)";
|
|
compatible = "linksys,whw03v2", "qcom,ipq4019";
|
|
|
|
aliases {
|
|
led-boot = &led_blue;
|
|
led-failsafe = &led_red;
|
|
led-running = &led_green;
|
|
led-upgrade = &led_red;
|
|
};
|
|
|
|
// The arguments rootfstype and ro are needed
|
|
// to override the default bootargs
|
|
chosen {
|
|
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
|
|
stdout-path = &blsp1_uart1;
|
|
};
|
|
|
|
soc {
|
|
ess-tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
};
|
|
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
&tlmm {
|
|
mdio_pins: mdio-pinmux {
|
|
mux-1 {
|
|
pins = "gpio6";
|
|
function = "mdio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-2 {
|
|
pins = "gpio7";
|
|
function = "mdc";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
i2c_0_pins: i2c-0-pinmux {
|
|
mux {
|
|
function = "blsp_i2c0";
|
|
pins = "gpio20", "gpio21";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
serial_0_pins: serial0-pinmux {
|
|
mux {
|
|
pins = "gpio16", "gpio17";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
serial_1_pins: serial1-pinmux {
|
|
mux {
|
|
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
|
function = "blsp_uart1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi-0-pinmux {
|
|
mux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio13", "gpio14", "gpio15";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
|
|
mux-cs {
|
|
pins = "gpio12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
spi_1_pins: spi-1-pinmux {
|
|
mux-1 {
|
|
function = "blsp_spi1";
|
|
pins = "gpio44", "gpio46","gpio47";
|
|
bias-disable;
|
|
};
|
|
|
|
mux-2 {
|
|
pins = "gpio31", "gpio45", "gpio49";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
output-high;
|
|
};
|
|
|
|
host-interrupt {
|
|
pins = "gpio42";
|
|
function = "gpio";
|
|
input;
|
|
};
|
|
};
|
|
|
|
wifi_0_pins: wifi0-pinmux {
|
|
btcoexist {
|
|
bias-pull-up;
|
|
drive-strength = <6>;
|
|
function = "gpio";
|
|
output-high;
|
|
pins = "gpio52";
|
|
};
|
|
};
|
|
|
|
zigbee-0 {
|
|
gpio-hog;
|
|
gpios = <29 GPIO_ACTIVE_HIGH>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
|
|
zigbee-1 {
|
|
gpio-hog;
|
|
gpios = <50 GPIO_ACTIVE_HIGH>;
|
|
bias-disable;
|
|
input;
|
|
};
|
|
|
|
bluetooth-enable {
|
|
gpio-hog;
|
|
gpios = <32 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
phy-reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
ðphy0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ðphy1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ðphy2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ðphy3 {
|
|
reg = <0x1b>;
|
|
};
|
|
|
|
ðphy4 {
|
|
reg = <0x1c>;
|
|
};
|
|
|
|
&psgmiiphy {
|
|
reg = <0x1d>;
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&prng {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
num-channels = <4>;
|
|
qcom,num-ees = <2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
status = "okay";
|
|
pinctrl-0 = <&serial_0_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&blsp1_uart2 {
|
|
status = "okay";
|
|
pinctrl-0 = <&serial_1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
bluetooth {
|
|
compatible = "csr,8811";
|
|
|
|
enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&blsp1_spi2 {
|
|
pinctrl-0 = <&spi_1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
|
|
|
|
zigbee@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compatible = "silabs,em3581";
|
|
reg = <0>;
|
|
spi-max-frequency = <12000000>;
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c3 {
|
|
pinctrl-0 = <&i2c_0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
// RGB LEDs
|
|
pca9633: led-controller {
|
|
compatible = "nxp,pca9633";
|
|
nxp,hw-blink;
|
|
reg = <0x62>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led_red: red@0 {
|
|
label = "red";
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
linux,default-trigger = "none";
|
|
reg = <0>;
|
|
};
|
|
|
|
led_green: green@1 {
|
|
label = "green";
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
linux,default-trigger = "none";
|
|
reg = <1>;
|
|
};
|
|
|
|
led_blue: blue@2 {
|
|
label = "blue";
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
linux,default-trigger = "default-on";
|
|
reg = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb3_ss_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "SBL1";
|
|
reg = <0x0 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "MIBIB";
|
|
reg = <0x100000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "QSEE";
|
|
reg = <0x200000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "CDT";
|
|
reg = <0x300000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@380000 {
|
|
label = "APPSBL";
|
|
reg = <0x380000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@580000 {
|
|
label = "ART";
|
|
reg = <0x580000 0x80000>;
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
read-only;
|
|
|
|
precal_art_1000: precal@1000 {
|
|
reg = <0x1000 0x2f20>;
|
|
};
|
|
|
|
precal_art_5000: precal@5000 {
|
|
reg = <0x5000 0x2f20>;
|
|
};
|
|
|
|
precal_art_9000: precal@9000 {
|
|
reg = <0x9000 0x2f20>;
|
|
};
|
|
|
|
macaddr_gmac0: macaddr@0 {
|
|
reg = <0x0 0x6>;
|
|
};
|
|
|
|
macaddr_gmac1: macaddr@6 {
|
|
reg = <0x6 0x6>;
|
|
};
|
|
};
|
|
|
|
partition@600000 {
|
|
label = "u_env";
|
|
reg = <0x600000 0x80000>;
|
|
};
|
|
|
|
partition@680000 {
|
|
label = "s_env";
|
|
reg = <0x680000 0x40000>;
|
|
};
|
|
|
|
partition@6c0000 {
|
|
label = "devinfo";
|
|
reg = <0x6c0000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@700000 {
|
|
label = "kernel";
|
|
reg = <0x700000 0xa100000>;
|
|
};
|
|
|
|
partition@d00000 {
|
|
label = "rootfs";
|
|
reg = <0xd00000 0x9b00000>;
|
|
};
|
|
|
|
partition@a800000 {
|
|
label = "alt_kernel";
|
|
reg = <0xa800000 0xa100000>;
|
|
};
|
|
|
|
partition@ae00000 {
|
|
label = "alt_rootfs";
|
|
reg = <0xae00000 0x9b00000>;
|
|
};
|
|
|
|
partition@14900000 {
|
|
label = "sysdiag";
|
|
reg = <0x14900000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@14b00000 {
|
|
label = "syscfg";
|
|
reg = <0x14b00000 0xb500000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
|
wake-gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
|
|
clkreq-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi2: wifi@1,0 {
|
|
compatible = "qcom,ath10k";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
status = "okay";
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
};
|
|
|
|
&swport4 {
|
|
status = "okay";
|
|
label = "lan";
|
|
|
|
nvmem-cell-names = "mac-address";
|
|
nvmem-cells = <&macaddr_gmac1>;
|
|
};
|
|
|
|
&swport5 {
|
|
status = "okay";
|
|
label = "wan";
|
|
|
|
nvmem-cell-names = "mac-address";
|
|
nvmem-cells = <&macaddr_gmac0>;
|
|
};
|
|
|
|
&wifi0 {
|
|
pinctrl-0 = <&wifi_0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
qcom,coexist-support = <1>;
|
|
qcom,coexist-gpio-pin = <0x34>;
|
|
|
|
ieee80211-freq-limit = <2401000 2473000>;
|
|
qcom,ath10k-calibration-variant = "linksys-whw03v2";
|
|
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_1000>, <&macaddr_gmac0>;
|
|
mac-address-increment = <1>;
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
|
|
ieee80211-freq-limit = <5170000 5250000>;
|
|
qcom,ath10k-calibration-variant = "linksys-whw03v2";
|
|
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_5000>, <&macaddr_gmac0>;
|
|
mac-address-increment = <2>;
|
|
};
|
|
|
|
&wifi2 {
|
|
status = "okay";
|
|
|
|
ieee80211-freq-limit = <5735000 5835000>;
|
|
qcom,ath10k-calibration-variant = "linksys-whw03v2";
|
|
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_9000>, <&macaddr_gmac0>;
|
|
mac-address-increment = <3>;
|
|
};
|