373 lines
6.6 KiB
Plaintext
373 lines
6.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Aerohive BR200-WP Device Tree Source
|
|
*
|
|
* Based on: Aerohive HiveAP-330 Device Tree Source
|
|
*
|
|
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
|
|
* Copyright (C) 2023 Pawel Dembicki <paweldembicki@gmail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/include/ "fsl/p1020si-pre.dtsi"
|
|
|
|
/ {
|
|
model = "Aerohive BR200-WP";
|
|
compatible = "aerohive,br200-wp";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,9600";
|
|
bootargs-override = "console=ttyS0,9600 noinitrd";
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &led_attention;
|
|
led-failsafe = &led_attention;
|
|
led-running = &led_status;
|
|
led-upgrade = &led_status;
|
|
label-mac-device = &enet0;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
cpus {
|
|
/delete-property/ PowerPC,P1020@1; /* P1011 have one core only */
|
|
};
|
|
|
|
board_lbc: lbc: localbus@ffe05000 {
|
|
reg = <0 0xffe05000 0 0x1000>;
|
|
ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x4000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x40000>;
|
|
label = "dtb";
|
|
};
|
|
|
|
partition@40000 {
|
|
reg = <0x40000 0x40000>;
|
|
label = "initramfs";
|
|
};
|
|
|
|
partition@80000 {
|
|
reg = <0x80000 0x27c0000>;
|
|
label = "rootfs";
|
|
};
|
|
|
|
partition@2840000 {
|
|
reg = <0x2840000 0x800000>;
|
|
label = "kernel";
|
|
};
|
|
|
|
partition@3040000 {
|
|
reg = <0x3040000 0xec0000>;
|
|
label = "stock-jffs2";
|
|
read-only;
|
|
};
|
|
|
|
partition@3f00000 {
|
|
reg = <0x3f00000 0x20000>;
|
|
label = "hw-info";
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_hwinfo_0: macaddr@0 {
|
|
compatible = "mac-base";
|
|
reg = <0x0 0x6>;
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@3f20000 {
|
|
reg = <0x3f20000 0x20000>;
|
|
label = "boot-info";
|
|
read-only;
|
|
};
|
|
|
|
partition@3f40000 {
|
|
reg = <0x3f40000 0x20000>;
|
|
label = "boot-info-backup";
|
|
read-only;
|
|
};
|
|
|
|
partition@3f60000 {
|
|
reg = <0x3f60000 0x20000>;
|
|
label = "u-boot-env";
|
|
};
|
|
|
|
partition@3f80000 {
|
|
reg = <0x3f80000 0x80000>;
|
|
label = "u-boot";
|
|
read-only;
|
|
};
|
|
|
|
firmware@0 {
|
|
reg = <0x0 0x3040000>;
|
|
label = "firmware";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
board_soc: soc: soc@ffe00000 {
|
|
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
|
|
mdio@24000 {
|
|
|
|
phy_port1: phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
phy_port2: phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy_port3: phy@2 {
|
|
reg = <2>;
|
|
};
|
|
|
|
phy_port4: phy@3 {
|
|
reg = <3>;
|
|
};
|
|
|
|
phy_port5: phy@4 {
|
|
reg = <4>;
|
|
};
|
|
|
|
switch@10 {
|
|
compatible = "qca,qca8327";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x10>;
|
|
reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
phy-handle = <&phy_port1>;
|
|
nvmem-cells = <&macaddr_hwinfo_0 2>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
phy-handle = <&phy_port2>;
|
|
nvmem-cells = <&macaddr_hwinfo_0 3>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
phy-handle = <&phy_port3>;
|
|
nvmem-cells = <&macaddr_hwinfo_0 4>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
phy-handle = <&phy_port4>;
|
|
nvmem-cells = <&macaddr_hwinfo_0 5>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "wan";
|
|
phy-handle = <&phy_port5>;
|
|
nvmem-cells = <&macaddr_hwinfo_0 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&enet0>;
|
|
phy-mode = "rgmii-id";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio@25000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio@26000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
enet0: ethernet@b0000 {
|
|
status = "okay";
|
|
phy-connection-type = "rgmii-id";
|
|
nvmem-cells = <&macaddr_hwinfo_0 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@b1000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
enet2: ethernet@b2000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio-controller@fc00 {
|
|
};
|
|
|
|
usb@22000 {
|
|
phy_type = "ulpi";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
usb@23000 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe09000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
pci1: pcie@ffe0a000 {
|
|
reg = <0x0 0xffe0a000 0x0 0x1000>;
|
|
ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
|
|
|
|
reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
|
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xc0000000
|
|
0x2000000 0x0 0xc0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
|
|
ath9k: wifi@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
nvmem-cells = <&macaddr_hwinfo_0 16>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_attention: led-0 {
|
|
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
|
label = "amber:status";
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
|
|
led_status: led-1 {
|
|
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
label = "white:status";
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
};
|
|
|
|
buttons {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "Reset button";
|
|
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "fsl/p1020si-post.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "/soc@ffe00000/serial@4500";
|
|
};
|
|
|
|
cpus {
|
|
PowerPC,P1020@0 {
|
|
i-cache-sets = <0x80>;
|
|
i-cache-size = <0x8000>;
|
|
i-cache-block-size = <0x20>;
|
|
d-cache-sets = <0x80>;
|
|
d-cache-size = <0x8000>;
|
|
d-cache-block-size = <0x20>;
|
|
clock-frequency = <0x2756cd00>;
|
|
bus-frequency = <0x13ab6680>;
|
|
timebase-frequency = <0x2756cd0>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x00 0x00 0x00 0x10000000>;
|
|
};
|
|
|
|
localbus@ffe05000 {
|
|
bus-frequency = <0x13ab668>;
|
|
};
|
|
|
|
soc@ffe00000 {
|
|
bus-frequency = <0x13ab6680>;
|
|
|
|
serial@4500 {
|
|
clock-frequency = <0x13ab6680>;
|
|
};
|
|
|
|
serial@4600 {
|
|
clock-frequency = <0x13ab6680>;
|
|
};
|
|
};
|
|
|
|
pcie@ffe09000 {
|
|
clock-frequency = <0x1fca055>;
|
|
};
|
|
|
|
pcie@ffe0a000 {
|
|
clock-frequency = <0x1fca055>;
|
|
};
|
|
};
|