John Crispin 76e1efc042 AR8216: don't display MIB counters if all are empty ...

For unused switch ports all MIB values are zero. Displaying ~40 empty
MIB counters is just confusing and makes it hard to read the output of
swconfig dev <dev> show.
Therefore, if all MIB counters for a port are zero, just display
an info that the MIB counters are empty.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48910

2016-03-04 08:33:22 +00:00

..

b53

b53: support setting port link

2016-02-03 09:33:56 +00:00

adm6996.c

generic: fix adm6996 init

2015-10-26 10:39:53 +00:00

adm6996.h

linux/generic: add MIB counters and port status to ADM6996 switch

2014-04-22 08:08:02 +00:00

ar8216.c

AR8216: don't display MIB counters if all are empty

2016-03-04 08:33:22 +00:00

ar8216.h

ar8216: add swconfig attributes for ARL table flushing

2015-07-15 08:17:42 +00:00

ar8327.c

ar8327: add IGMP Snooping support

2016-01-17 10:42:46 +00:00

ar8327.h

ar8327: add IGMP Snooping support

2016-01-17 10:42:46 +00:00

ip17xx.c

unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.

2010-10-12 20:49:35 +00:00

mvsw61xx.c

mvsw61xx: match swconfig function names

2015-09-11 16:34:49 +00:00

mvsw61xx.h

Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1).

2015-08-21 08:09:52 +00:00

mvswitch.c

kernel: mvswitch: merge 3.10+ compile fix into the code

2015-12-04 09:45:07 +00:00

mvswitch.h

…

psb6970.c

unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.

2010-10-12 20:49:35 +00:00

rtl8306.c

revert: kernel: rtl8306: fix max pvid & remove port isolation

2014-03-30 10:04:55 +00:00

rtl8366_smi.c

strict_strtoul is obsolete, use kstrtoul instead

2013-07-27 09:23:18 +00:00

rtl8366_smi.h

linux: generic: rtl836*: fix compilation with !CONFIG_OF

2012-12-15 13:32:02 +00:00

rtl8366rb.c

generic: add port mirroring/monitoring capability to rtl8366rb switch

2013-06-04 13:25:52 +00:00

rtl8366s.c

fix rtl8366s OF binding

2013-04-12 18:56:05 +00:00

rtl8367.c

rtl8367: add support for configuring the VLAN FID

2013-08-12 17:25:25 +00:00

rtl8367b.c

generic: rtl8367: add compatible string with vendor prefix

2013-04-06 17:19:31 +00:00

swconfig_leds.c

switch: allow Ethernet port LEDs to show specific port speeds only

2016-02-25 13:31:26 +00:00

swconfig.c

swconfig: add (PHY) generic helper setting port link

2016-02-03 09:33:38 +00:00