Resneptacle/openwrt-cghmn-mt300n
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
openwrt-cghmn-mt300n/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
Mikhail Zhilkin 620aa80064 mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 
This commit adds OpenWrt U-Boot (UBI) layout support for MERCUSYS MR90X
v1.

Stock U-Boot UBI size:   50 MiB
OpenWrt U-boot UBI size: 126 MiB

Install
-------
1. Perform steps 1-14 of the OpenWrt installation guide (use OpenWrt
   initramfs-recovery.itb instead of initramfs-kernel.bin at the step 10,
   12 and 14).
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation

2. Make backups:
```
cat /dev/mtd0 > /tmp/boot.bin
cat /dev/mtd5 > /tmp/tp_data.bin
```
   Copy /tp_data dir content, /tmp/boot.bin and /tmp/tp_data.bin and to
   your PC using scp. You can also backup the remaining partititons. Copy
   backups to a safe place, they are required for the next steps and stock
   firmware recovery.

3. Reboot to OpenWrt initramfs:
```
reboot
```

4. Copy OpenWrt ubi-bl31-uboot.fip, ubi-preloader.bin,
   ubi-squashfs-sysupgrade.itb and MT7986_EEPROM.bin, default-mac (from
   /tp_data backup) to the /tmp folder of the router using scp.

5. Prepare UBI:
```
ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3
ubimkvol /dev/ubi0 -N fip -t static -s 1MiB
ubiupdatevol /dev/ubi0_0 /tmp/ubi-bl31-uboot.fip
ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000
ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000
```

6.  Install kmod-mtd-rw and unlock partitions:
```
opkg update && opkg install kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
mtd unlock boot
mtd unlock bl2
mtd unlock factory
```

7. Prepare "factory" partition:
```
dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin
dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc
dd if=/tmp/default-mac >> /tmp/factory.bin
```

8. Write "factory" partition:
```
mtd erase factory
mtd write /tmp/factory.bin factory
```

9. Write preloader partition:
```
mtd erase bl2
mtd write /tmp/ubi-preloader.bin bl2
```

10. Write OpenWrt sysupgrade image:
```
sysupgrade -n /tmp/ubi-squashfs-sysupgrade.itb
```

Recovery
--------
1. Place OpenWrt initramfs-recovery.itb image (with original name) on the
   tftp server (IP: 192.168.1.254).
2. Press "reset" button and power on the router. After ~10 sec release the
   button.
3. Use OpenWrt initramfs system for recovery.

BL2 and FIP recovery
--------------------
Use mtk_uartboot and UART connetion if BL2 or FIP in UBI is destroyed:
Link: https://github.com/981213/mtk_uartboot
Link: https://openwrt.org/toh/mercusys/mr90x_v1#serial

Return to stock:
----------------
1. Copy "boot" partition backup (boot.bin) to the /tmp dir of the router
   using scp.

2. Install kmod-mtd-rw:
```
opkg update && opkg install kmod-mtd-rw
```

3. Restore stock U-Boot:
```
   insmod mtd-rw i_want_a_brick=1
   mtd unlock boot
   mtd erase boot
   mtd write /tmp/boot.bin boot
```

4. Erase UBI and reboot:
```
mtd erase ubi
reboot
```

5. Open U-Boot web recovery, upload stock firmware image and start
   upgrade.
Link: http://192.168.1.1

6. Complete steps 1-9 of the OpenWrt installation guide to get root
   rights.
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation

7. Upload "tp_data" partition backup (tp_data.bin) to the /tmp folder of
   the router using scp.

8. Restore stock calibrations:
```
mtd write /tmp/tp_data.bin tp_data
reboot
```

9. Perform "factory restore" via stock firmware web interface.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16744
(cherry picked from commit ee8df790cae843f11f78511dd9ffac7e80a4d707)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17129
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-12-10 01:08:03 +01:00

143 lines
6.6 KiB
Plaintext
Raw Blame History

. /lib/functions/leds.sh
. /lib/functions/uci-defaults.sh
board=$(board_name)
board_config_update
case $board in
abt,asr3000)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0"
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan-5ghz" "phy1-ap0"
;;
confiabits,mt7981)
ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx"
ucidef_set_led_netdev "lan3" "lan3" "blue:lan-3" "lan3" "link tx rx"
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
;;
bananapi,bpi-r3-mini)
ucidef_set_led_netdev "lan1" "LAN" "mdio-bus:0e:green:lan" "eth0" "link_2500 link_1000 tx rx"
ucidef_set_led_netdev "lan2" "LAN" "mdio-bus:0e:yellow:lan" "eth0" "link_2500 link_100 tx rx"
ucidef_set_led_netdev "wan1" "WAN" "mdio-bus:0f:green:wan" "eth1" "link_2500 link_1000 tx rx"
ucidef_set_led_netdev "wan2" "WAN" "mdio-bus:0f:yellow:wan" "eth1" "link_2500 link_100 tx rx"
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan-1" "phy0-ap0"
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan-2" "phy1-ap0"
;;
bananapi,bpi-r4|\
bananapi,bpi-r4-poe)
ucidef_set_led_netdev "wan" "wan" "mt7530-0:00:green:lan" "wan" "link tx rx"
ucidef_set_led_netdev "lan1" "lan1" "mt7530-0:01:green:lan" "lan1" "link tx rx"
ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
;;
cudy,re3000-v1)
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" "link tx rx"
;;
cudy,wr3000-v1)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;
glinet,gl-x3000|\
glinet,gl-xe3000)
ucidef_set_led_default "power" "POWER" "green:power" "1"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
ucidef_set_led_netdev "5g_1" "5G_1" "green:5g:led1" "wwan0"
ucidef_set_led_netdev "5g_2" "5G_2" "green:5g:led2" "wwan0"
ucidef_set_led_netdev "5g_3" "5G_3" "green:5g:led3" "wwan0"
ucidef_set_led_netdev "5g_4" "5G_4" "green:5g:led4" "wwan0"
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wifi2g" "phy0-ap0"
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wifi5g" "phy1-ap0"
;;
mercusys,mr90x-v1|\
mercusys,mr90x-v1-ubi)
ucidef_set_led_netdev "lan-0" "lan-0" "green:lan-0" "lan0" "link tx rx"
ucidef_set_led_netdev "lan-1" "lan-1" "green:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx"
ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
;;
netgear,wax220)
ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
;;
nokia,ea0326gmp)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link"
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan" "link"
ucidef_set_led_netdev "wlan" "WLAN" "green:wlan" "phy1-ap0" "link"
;;
openembed,som7981)
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
;;
openwrt,one)
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link"
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
;;
routerich,ax3000|\
routerich,ax3000-ubootmod)
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
ucidef_set_led_netdev "lan-3" "lan-3" "blue:lan-3" "lan3" "link tx rx"
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
;;
smartrg,sdg-8733|\
smartrg,sdg-8734)
ucidef_set_led_netdev "lan-1-green" "LAN1" "mdio-bus:08:green:lan" "lan1" "link_2500 link_5000"
ucidef_set_led_netdev "lan-1-orange" "LAN1" "mdio-bus:08:orange:lan" "lan1" "link_100 link_1000"
ucidef_set_led_netdev "lan-1-white" "LAN1" "mdio-bus:08:white:lan" "lan1" "link_10000"
ucidef_set_led_netdev "lan-2-green" "LAN2" "mt7530-0:01:green:lan" "lan2" "link_1000"
ucidef_set_led_netdev "lan-2-amber" "LAN2" "mt7530-0:01:amber:lan" "lan2" "link_100 link_10"
ucidef_set_led_netdev "lan-3-green" "LAN3" "mt7530-0:02:green:lan" "lan3" "link_1000"
ucidef_set_led_netdev "lan-3-amber" "LAN3" "mt7530-0:02:amber:lan" "lan3" "link_100 link_10"
ucidef_set_led_netdev "lan-4-green" "LAN4" "mt7530-0:03:green:lan" "lan4" "link_1000"
ucidef_set_led_netdev "lan-4-amber" "LAN4" "mt7530-0:03:amber:lan" "lan4" "link_100 link_10"
ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:00:green:wan" "wan" "link_2500 link_5000"
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:00:orange:wan" "wan" "link_100 link_1000"
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:00:white:wan" "wan" "link_10000"
;;
smartrg,sdg-8733a)
ucidef_set_led_netdev "lan-green-act" "LAN" "mdio-bus:0f:green:lan" "lan" "link_2500"
ucidef_set_led_netdev "lan-amber" "LAN" "amber:lan" "lan" "link_100"
ucidef_set_led_netdev "lan-green" "LAN" "green:lan" "lan" "link_1000"
ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:08:green:wan" "wan" "link_2500 link_5000"
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:08:orange:wan" "wan" "link_100 link_1000"
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:08:white:wan" "wan" "link_10000"
;;
tplink,re6000xd)
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-0" "lan1" "link tx rx"
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-1" "lan2" "link tx rx"
ucidef_set_led_netdev "eth1" "lan-3" "blue:lan-2" "eth1" "link tx rx"
;;
wavlink,wl-wn586x3)
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
ucidef_set_led_netdev "wan" "wan" "blue:wan" "eth1" "link tx rx"
;;
xiaomi,mi-router-wr30u-stock|\
xiaomi,mi-router-wr30u-ubootmod)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
;;
xiaomi,redmi-router-ax6000-stock|\
xiaomi,redmi-router-ax6000-ubootmod)
ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
;;
zbtlink,zbt-z8103ax)
ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
;;
zyxel_ex5601-t0-stock|\
zyxel,ex5601-t0-ubootmod)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx"
ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx"
ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx"
ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx"
;;
esac
board_config_flush
exit 0
Reference in New Issue View Git Blame Copy Permalink