21f0ab503c
These are used by both the armsr (EFI boot) and
layerscape targets for phylink-controlled SFP
support on NXP DPAA2 platforms (LS1088,LS2088,LX2160).
This is in place of commit a7bd96c98f8f
("layerscape: add patches for SFP support on DPAA2 platforms")
in the main branch. armsr in main started at kernel 6.1
so there is not an equivalent 5.15 commit to cherry pick.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
35 lines
1.4 KiB
Diff
35 lines
1.4 KiB
Diff
From c314138bd045e050432158ab021160de3ba51c5e Mon Sep 17 00:00:00 2001
|
|
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Date: Thu, 30 Jan 2020 22:42:38 +0000
|
|
Subject: [PATCH 2/4] net: dpaa2-mac: add support for more 10G modes
|
|
|
|
Phylink documentation says:
|
|
* Note that the PHY may be able to transform from one connection
|
|
* technology to another, so, eg, don't clear 1000BaseX just
|
|
* because the MAC is unable to BaseX mode. This is more about
|
|
* clearing unsupported speeds and duplex settings. The port modes
|
|
* should not be cleared; phylink_set_port_modes() will help with this.
|
|
|
|
So add the missing 10G modes.
|
|
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
---
|
|
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 6 ++++++
|
|
1 file changed, 6 insertions(+)
|
|
|
|
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
|
|
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
|
|
@@ -140,6 +140,12 @@ static void dpaa2_mac_validate(struct ph
|
|
case PHY_INTERFACE_MODE_10GBASER:
|
|
case PHY_INTERFACE_MODE_USXGMII:
|
|
phylink_set(mask, 10000baseT_Full);
|
|
+ phylink_set(mask, 10000baseKR_Full);
|
|
+ phylink_set(mask, 10000baseCR_Full);
|
|
+ phylink_set(mask, 10000baseSR_Full);
|
|
+ phylink_set(mask, 10000baseLR_Full);
|
|
+ phylink_set(mask, 10000baseLRM_Full);
|
|
+ phylink_set(mask, 10000baseER_Full);
|
|
if (state->interface == PHY_INTERFACE_MODE_10GBASER)
|
|
break;
|
|
phylink_set(mask, 5000baseT_Full);
|