28fd279e5d
Address most comments made by Adrian Schmutzler on the mailing list.
The device name is kept as 'TP-Link Talon AD7200' as that seems to be
the marketing name TP-Link chose for that device, it also matches the
naming scheme for other TP-Link devices (e.g. 'TP-Link Archer C7').
Fixes: 1a775a4fd0 ("ipq806x: add support for TP-Link Talon AD7200")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
439 lines
7.0 KiB
Plaintext
439 lines
7.0 KiB
Plaintext
//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
#include "qcom-ipq8064-v2.0.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "TP-Link Talon AD7200";
|
|
compatible = "tplink,ad7200", "qcom,ipq8064";
|
|
|
|
memory@0 {
|
|
reg = <0x42000000 0x1e000000>;
|
|
device_type = "memory";
|
|
};
|
|
|
|
aliases {
|
|
mdio-gpio0 = &mdio0;
|
|
|
|
led-boot = &power;
|
|
led-failsafe = &power;
|
|
led-running = &power;
|
|
led-upgrade = &power;
|
|
label-mac-device = &gmac2;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
wifi {
|
|
label = "wifi";
|
|
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RFKILL>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
|
|
ledgeneral {
|
|
label = "led-enable";
|
|
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_LIGHTS_TOGGLE>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&led_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
lan {
|
|
label = "blue:lan";
|
|
gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb1 {
|
|
label = "blue:usb1";
|
|
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan5g {
|
|
label = "blue:wlan5g";
|
|
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb3 {
|
|
label = "blue:usb3";
|
|
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan2g {
|
|
label = "blue:wlan2g";
|
|
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wan_orange {
|
|
label = "orange:wan";
|
|
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wan_blue {
|
|
label = "blue:wan";
|
|
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "blue:wps";
|
|
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan60g {
|
|
label = "blue:wlan60g";
|
|
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
power: status {
|
|
label = "blue:status";
|
|
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qcom_pinmux {
|
|
button_pins: button_pins {
|
|
mux {
|
|
pins = "gpio53", "gpio54", "gpio67";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
led_pins: led_pins {
|
|
mux {
|
|
pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
|
|
"gpio33", "gpio55", "gpio56", "gpio66";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
spi_pins: spi_pins {
|
|
mux {
|
|
pins = "gpio18", "gpio19", "gpio21";
|
|
function = "gsbi5";
|
|
bias-pull-down;
|
|
};
|
|
|
|
data {
|
|
pins = "gpio18", "gpio19";
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
cs {
|
|
pins = "gpio20";
|
|
function = "gpio";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
clk {
|
|
pins = "gpio21";
|
|
drive-strength = <12>;
|
|
};
|
|
};
|
|
|
|
usb0_pwr_en_pin: usb0_pwr_en_pin {
|
|
mux {
|
|
pins = "gpio25";
|
|
function = "gpio";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
usb1_pwr_en_pin: usb1_pwr_en_pin {
|
|
mux {
|
|
pins = "gpio23";
|
|
function = "gpio";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gsbi5 {
|
|
qcom,mode = <GSBI_PROT_SPI>;
|
|
status = "okay";
|
|
|
|
spi4: spi@1a280000 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&spi_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
|
|
|
m25p80@0 {
|
|
compatible = "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
spi-max-frequency = <50000000>;
|
|
reg = <0>;
|
|
|
|
partition@0 {
|
|
label = "SBL1";
|
|
reg = <0x0 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@20000 {
|
|
label = "MIBIB";
|
|
reg = <0x20000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "SBL2";
|
|
reg = <0x40000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "SBL3";
|
|
reg = <0x60000 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@90000 {
|
|
label = "DDRCONFIG";
|
|
reg = <0x90000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@a0000 {
|
|
label = "SSD";
|
|
reg = <0xa0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@b0000 {
|
|
label = "TZ";
|
|
reg = <0xb0000 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "RPM";
|
|
reg = <0xe0000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "fs-uboot";
|
|
reg = <0x100000 0x70000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@170000 {
|
|
label = "uboot-env";
|
|
reg = <0x170000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1b0000 {
|
|
label = "radio";
|
|
reg = <0x1b0000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f0000 {
|
|
label = "os-image";
|
|
reg = <0x1f0000 0x400000>;
|
|
};
|
|
|
|
partition@5f0000 {
|
|
label = "rootfs";
|
|
reg = <0x5f0000 0x1900000>;
|
|
};
|
|
|
|
defaultmac: partition@1ef0000 {
|
|
label = "default-mac";
|
|
reg = <0x1ef0000 0x00200>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1ef0200 {
|
|
label = "pin";
|
|
reg = <0x1ef0200 0x00200>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1ef0400 {
|
|
label = "device-id";
|
|
reg = <0x1ef0400 0x00200>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1ef0600 {
|
|
label = "product-info";
|
|
reg = <0x1ef0600 0x0fa00>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f00000 {
|
|
label = "partition-table";
|
|
reg = <0x1f00000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f10000 {
|
|
label = "soft-version";
|
|
reg = <0x1f10000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f20000 {
|
|
label = "support-list";
|
|
reg = <0x1f20000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f30000 {
|
|
label = "profile";
|
|
reg = <0x1f30000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f40000 {
|
|
label = "default-config";
|
|
reg = <0x1f40000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f50000 {
|
|
label = "user-config";
|
|
reg = <0x1f50000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f90000 {
|
|
label = "qos-db";
|
|
reg = <0x1f90000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1fd0000 {
|
|
label = "usb-config";
|
|
reg = <0x1fd0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1fe0000 {
|
|
label = "log";
|
|
reg = <0x1fe0000 0x20000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb3_0 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&usb0_pwr_en_pin>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&usb3_1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&usb1_pwr_en_pin>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
max-link-speed = <1>;
|
|
};
|
|
|
|
&pcie2 {
|
|
status = "okay";
|
|
max-link-speed = <1>;
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
qca,ar8327-initvals = <
|
|
0x00004 0x7600000 /* PAD0_MODE */
|
|
0x00008 0x1000000 /* PAD5_MODE */
|
|
0x0000c 0x80 /* PAD6_MODE */
|
|
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
|
0x000e0 0xc74164de /* SGMII_CTRL */
|
|
0x0007c 0x4e /* PORT0_STATUS */
|
|
0x00094 0x4e /* PORT6_STATUS */
|
|
>;
|
|
};
|
|
|
|
phy4: ethernet-phy@4 {
|
|
reg = <4>;
|
|
};
|
|
};
|
|
|
|
&gmac1 {
|
|
status = "okay";
|
|
phy-mode = "rgmii";
|
|
qcom,id = <1>;
|
|
|
|
pinctrl-0 = <&rgmii2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
mtd-mac-address = <&defaultmac 0x8>;
|
|
mtd-mac-address-increment = <1>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&gmac2 {
|
|
status = "okay";
|
|
phy-mode = "sgmii";
|
|
qcom,id = <2>;
|
|
|
|
mtd-mac-address = <&defaultmac 0x8>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&adm_dma {
|
|
status = "okay";
|
|
};
|