openwrt-cghmn-mt300n/target/linux/bcm27xx/patches-6.6/950-1495-media-i2c-imx415-Add-read-write-control-of-VBLANK.patch
Álvaro Fernández Rojas 251f76c1c6 bcm27xx: pull 6.6 patches from RPi repo
Adds latest 6.6 patches from the Raspberry Pi repository.

These patches were generated from:
https://github.com/raspberrypi/linux/commits/rpi-6.6.y/
With the following command:
git format-patch -N v6.6.83..HEAD
(HEAD -> 08d4e8f52256bd422d8a1f876411603f627d0a82)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2025-03-16 08:04:48 +01:00

147 lines
4.9 KiB
Diff

From 4e8d73ce89c6dd6fdcb8dd7df8310762707c5b1a Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 1 Jan 2025 14:18:25 +0000
Subject: [PATCH] media: i2c: imx415: Add read/write control of VBLANK
This also requires that the ranges for the exposure control
are updated.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/i2c/imx415.c | 52 +++++++++++++++++++++++++-------------
1 file changed, 34 insertions(+), 18 deletions(-)
--- a/drivers/media/i2c/imx415.c
+++ b/drivers/media/i2c/imx415.c
@@ -25,6 +25,7 @@
#define IMX415_PIXEL_ARRAY_WIDTH 3864
#define IMX415_PIXEL_ARRAY_HEIGHT 2192
#define IMX415_PIXEL_ARRAY_VBLANK 58
+#define IMX415_EXPOSURE_OFFSET 8
#define IMX415_NUM_CLK_PARAM_REGS 11
@@ -56,6 +57,7 @@
#define IMX415_OUTSEL IMX415_REG_8BIT(0x30C0)
#define IMX415_DRV IMX415_REG_8BIT(0x30C1)
#define IMX415_VMAX IMX415_REG_24BIT(0x3024)
+#define IMX415_VMAX_MAX 0xfffff
#define IMX415_HMAX IMX415_REG_16BIT(0x3028)
#define IMX415_SHR0 IMX415_REG_24BIT(0x3050)
#define IMX415_GAIN_PCG_0 IMX415_REG_16BIT(0x3090)
@@ -457,7 +459,6 @@ static const struct imx415_clk_params im
/* all-pixel 2-lane 720 Mbps 15.74 Hz mode */
static const struct imx415_reg imx415_mode_2_720[] = {
- { IMX415_VMAX, 0x08CA },
{ IMX415_HMAX, 0x07F0 },
{ IMX415_LANEMODE, IMX415_LANEMODE_2 },
{ IMX415_TCLKPOST, 0x006F },
@@ -473,7 +474,6 @@ static const struct imx415_reg imx415_mo
/* all-pixel 2-lane 1440 Mbps 30.01 Hz mode */
static const struct imx415_reg imx415_mode_2_1440[] = {
- { IMX415_VMAX, 0x08CA },
{ IMX415_HMAX, 0x042A },
{ IMX415_LANEMODE, IMX415_LANEMODE_2 },
{ IMX415_TCLKPOST, 0x009F },
@@ -489,7 +489,6 @@ static const struct imx415_reg imx415_mo
/* all-pixel 4-lane 891 Mbps 30 Hz mode */
static const struct imx415_reg imx415_mode_4_891[] = {
- { IMX415_VMAX, 0x08CA },
{ IMX415_HMAX, 0x044C },
{ IMX415_LANEMODE, IMX415_LANEMODE_4 },
{ IMX415_TCLKPOST, 0x007F },
@@ -617,6 +616,7 @@ struct imx415 {
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *vflip;
+ struct v4l2_ctrl *exposure;
unsigned int cur_mode;
unsigned int num_data_lanes;
@@ -795,16 +795,37 @@ static int imx415_s_ctrl(struct v4l2_ctr
ctrls);
const struct v4l2_mbus_framefmt *format;
struct v4l2_subdev_state *state;
+ u32 exposure_max;
unsigned int vmax;
unsigned int flip;
-
- if (!sensor->streaming)
- return 0;
+ int ret;
state = v4l2_subdev_get_locked_active_state(&sensor->subdev);
format = v4l2_subdev_get_pad_format(&sensor->subdev, state, 0);
+ if (ctrl->id == V4L2_CID_VBLANK) {
+ exposure_max = format->height + ctrl->val -
+ IMX415_EXPOSURE_OFFSET;
+ __v4l2_ctrl_modify_range(sensor->exposure,
+ sensor->exposure->minimum,
+ exposure_max, sensor->exposure->step,
+ sensor->exposure->default_value);
+ }
+
+ if (!sensor->streaming)
+ return 0;
+
switch (ctrl->id) {
+ case V4L2_CID_VBLANK:
+ ret = imx415_write(sensor, IMX415_VMAX,
+ format->height + ctrl->val);
+ if (ret)
+ return ret;
+ /*
+ * Deliberately fall through as exposure is set based on VMAX
+ * which has just changed.
+ */
+ fallthrough;
case V4L2_CID_EXPOSURE:
/* clamp the exposure value to VMAX. */
vmax = format->height + sensor->vblank->cur.val;
@@ -840,7 +861,8 @@ static int imx415_ctrls_init(struct imx4
u64 pixel_rate = supported_modes[sensor->cur_mode].pixel_rate;
u64 lane_rate = supported_modes[sensor->cur_mode].lane_rate;
u32 exposure_max = IMX415_PIXEL_ARRAY_HEIGHT +
- IMX415_PIXEL_ARRAY_VBLANK - 8;
+ IMX415_PIXEL_ARRAY_VBLANK -
+ IMX415_EXPOSURE_OFFSET;
u32 hblank;
unsigned int i;
int ret;
@@ -869,8 +891,9 @@ static int imx415_ctrls_init(struct imx4
if (ctrl)
ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops, V4L2_CID_EXPOSURE,
- 4, exposure_max, 1, exposure_max);
+ sensor->exposure = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
+ V4L2_CID_EXPOSURE, 4,
+ exposure_max, 1, exposure_max);
v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
V4L2_CID_ANALOGUE_GAIN, IMX415_AGAIN_MIN,
@@ -887,16 +910,9 @@ static int imx415_ctrls_init(struct imx4
sensor->vblank = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
V4L2_CID_VBLANK,
IMX415_PIXEL_ARRAY_VBLANK,
- IMX415_PIXEL_ARRAY_VBLANK, 1,
- IMX415_PIXEL_ARRAY_VBLANK);
- if (sensor->vblank)
- sensor->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-
- /*
- * The pixel rate used here is a virtual value and can be used for
- * calculating the frame rate together with hblank. It may not
- * necessarily be the physically correct pixel clock.
- */
+ IMX415_VMAX_MAX - IMX415_PIXEL_ARRAY_HEIGHT,
+ 1, IMX415_PIXEL_ARRAY_VBLANK);
+
v4l2_ctrl_new_std(&sensor->ctrls, NULL, V4L2_CID_PIXEL_RATE, pixel_rate,
pixel_rate, 1, pixel_rate);