f2e1d37381
Motivation: Firmware with platform ID "XR450" required for easy installation. Manufacturer pages: Product page: https://www.netgear.com/support/product/xr450 Product Data Sheet: https://www.netgear.com/images/datasheet/networking/wifirouter/XR450.pdf Current firmware: https://www.downloads.netgear.com/files/GDC/XR450/XR450-V2.3.2.134.zip Specifications: Almost identical to Netgear XR500(https://openwrt.org/toh/hwdata/netgear/netgear_xr500) Differences: Platform ID: XR450, utilized for firmware validation WLAN 2.4GHz: b/g/n Supports QAM64 (XR500 QAM256) SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB Wireless: Qualcomm Atheros QCA9984 Switch: Qualcomm Atheros AR8337 rev. 2 Ethernet: 5x 1000/100/10 USB: 2x 3.0 Install via WEB GUI (recommended): 1. Navigate within GUI to firmware update section 2. Select openwrt-ipq806x-netgear_xr450-squashfs-factory.img 3. Dismiss downgrade warning Install via TFTP recovery (same as XR500/R7800): 1. Configure host PC to use static address 192.168.1.10 https://openwrt.org/toh/netgear/r7800#prerequisites_for_tftp_flashing 2. Flash openwrt-ipq806x-netgear_xr450-squashfs-factory.img using procedure https://openwrt.org/toh/netgear/r7800#tftp_flashing_process Revert to stock firmware 1. Download current manufacturer firmware, decompress zip file to obtain img file 2. Use TFTP recovery method flash img file (currently XR450-V2.3.2.134.img) ipq806x: add support to netgear_xr450 Signed-off-by: Andrzej Mialkowski <andrzej.mialkowski@gmail.com>
51 lines
860 B
Plaintext
51 lines
860 B
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "qcom-ipq8065-nighthawk.dtsi"
|
|
|
|
/ {
|
|
model = "Netgear Nighthawk XR450";
|
|
compatible = "netgear,xr450", "qcom,ipq8065", "qcom,ipq8064";
|
|
|
|
};
|
|
|
|
&leds {
|
|
usb1 {
|
|
label = "white:usb1";
|
|
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb2 {
|
|
label = "white:usb2";
|
|
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&partitions {
|
|
partition@1880000 {
|
|
label = "ubi";
|
|
reg = <0x1880000 0xce00000>;
|
|
};
|
|
|
|
partition@e680000 {
|
|
label = "reserve";
|
|
reg = <0xe680000 0x0780000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
&wifi0 {
|
|
nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
|
|
nvmem-cell-names = "mac-address", "pre-calibration";
|
|
};
|
|
|
|
&wifi1 {
|
|
nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
|
|
nvmem-cell-names = "mac-address", "pre-calibration";
|
|
};
|
|
|
|
&art {
|
|
macaddr_art_c: macaddr@c {
|
|
reg = <0xc 0x6>;
|
|
};
|
|
};
|