From 6553d598cdb507f7ede020f25da646ba084a23c6 Mon Sep 17 00:00:00 2001
From: Ziyang Huang <hzyitc@outlook.com>
Date: Sun, 8 Sep 2024 16:40:12 +0800
Subject: [PATCH] firmware: qcom_scm: support MPD

Add SCM calls to power up / down the SoC's internal WiFi radio and to 
load PIL segments to support the MPD architecture.

Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 drivers/firmware/qcom_scm.c            | 79 ++++++++++++++++++++++++++
 drivers/firmware/qcom_scm.h            |  3 +
 include/linux/firmware/qcom/qcom_scm.h |  3 +
 3 files changed, 85 insertions(+)

--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -713,6 +713,85 @@ bool qcom_scm_pas_supported(u32 peripher
 EXPORT_SYMBOL_GPL(qcom_scm_pas_supported);
 
 /**
+ * qcom_scm_internal_wifi_powerup() - Bring up internal wifi
+ * @peripheral:	peripheral id
+ *
+ * Return 0 on success.
+ */
+int qcom_scm_internal_wifi_powerup(u32 peripheral)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_INTERNAL_WIFI_POWERUP,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = peripheral,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_internal_wifi_powerup);
+
+/**
+ * qcom_scm_internal_wifi_shutdown() - Shut down internal wifi
+ * @peripheral: peripheral id
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_internal_wifi_shutdown(u32 peripheral)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_INTERNAL_WIFI_SHUTDOWN,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = peripheral,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_internal_wifi_shutdown);
+
+/**
+ * qcom_scm_pas_load_segment() - copy userpd PIL segments data to dma blocks
+ * @peripheral:		peripheral id
+ * @segment:		segment id
+ * @dma:		handle of dma region
+ * @seg_cnt:		no of dma blocks
+ *
+ * Returns 0 if trustzone successfully loads userpd PIL segments from dma
+ * blocks to DDR
+ */
+int qcom_scm_pas_load_segment(u32 peripheral, int segment, dma_addr_t dma, int seg_cnt)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_PIL_PAS_LOAD_SEG,
+		.arginfo = QCOM_SCM_ARGS(4, QCOM_SCM_VAL, QCOM_SCM_VAL, QCOM_SCM_RW, QCOM_SCM_VAL),
+		.args[0] = peripheral,
+		.args[1] = segment,
+		.args[2] = dma,
+		.args[3] = seg_cnt,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_pas_load_segment);
+
+/**
  * qcom_scm_msa_lock() - Lock given peripheral firmware region as MSA
  *
  * @peripheral:	peripheral id
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -98,6 +98,9 @@ extern int scm_legacy_call(struct device
 #define QCOM_SCM_PIL_PAS_SHUTDOWN	0x06
 #define QCOM_SCM_PIL_PAS_IS_SUPPORTED	0x07
 #define QCOM_SCM_PIL_PAS_MSS_RESET	0x0a
+#define QCOM_SCM_INTERNAL_WIFI_POWERUP	0x17
+#define QCOM_SCM_INTERNAL_WIFI_SHUTDOWN	0x18
+#define QCOM_SCM_PIL_PAS_LOAD_SEG	0x19
 #define QCOM_SCM_MSA_LOCK		0x24
 #define QCOM_SCM_MSA_UNLOCK		0x25
 
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -81,6 +81,9 @@ extern int qcom_scm_pas_mem_setup(u32 pe
 extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
 extern int qcom_scm_pas_shutdown(u32 peripheral);
 extern bool qcom_scm_pas_supported(u32 peripheral);
+extern int qcom_scm_internal_wifi_powerup(u32 peripheral);
+extern int qcom_scm_internal_wifi_shutdown(u32 peripheral);
+extern int qcom_scm_pas_load_segment(u32 peripheral, int segment, dma_addr_t dma, int seg_cnt);
 extern int qcom_scm_msa_lock(u32 peripheral);
 extern int qcom_scm_msa_unlock(u32 peripheral);