ath79: add support for GL.iNet GL-S200
Specifications:
SoC: QCA9531(650MHz)
RAM: DDR2 128M
Flash: SPI NOR 16M + SPI NAND 128M
WiFi: 2.4GHz with 2 antennas(WiFi/Thread)
Ethernet:
1xLAN(10/100M)
2xWAN(10/100M)
Button: 1x Reset Button
Switch: 1x Mode switch
LED: 1x Blue LED + 1x White LED + 1x Orange LED
IOT: Thread + ZigBee/Zwave
By uboot web failsafe:
Push the reset button for 5 seconds util the power led flash faster,
then use broswer to access http://192.168.1.1
Afterwards upgrade can use sysupgrade image.
Signed-off-by: Weiping Yang <weiping.yang@gl-inet.com>
This commit is contained in:
Weiping Yang
Hauke Mehrtens
parent
a2d8226c4f
commit
c7baca3bb6
@ -105,7 +105,9 @@ dongwon,dw02-412h-128m|\
|
||||
glinet,gl-ar300m-lite|\
|
||||
glinet,gl-ar300m-nand|\
|
||||
glinet,gl-ar300m-nor|\
|
||||
glinet,gl-ar300m16)
|
||||
glinet,gl-ar300m16|\
|
||||
glinet,gl-s200-nor|\
|
||||
glinet,gl-s200-nor-nand)
|
||||
idx="$(find_mtd_index u-boot-env)"
|
||||
[ -n "$idx" ] && \
|
||||
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
|
||||
|
||||
29
target/linux/ath79/dts/qca9531_glinet_gl-s200-nor-nand.dts
Normal file
29
target/linux/ath79/dts/qca9531_glinet_gl-s200-nor-nand.dts
Normal file
@ -0,0 +1,29 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "qca9531_glinet_gl-s200.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "glinet,gl-s200-nor-nand", "qca,qca9531";
|
||||
model = "GL.iNet GL-S200 (NOR/NAND)";
|
||||
};
|
||||
|
||||
&nor_partitions {
|
||||
partition@60000 {
|
||||
label = "kernel";
|
||||
reg = <0x060000 0x400000>;
|
||||
};
|
||||
parition@460000 {
|
||||
label = "nor_reserved";
|
||||
reg = <0x460000 0xb80000>;
|
||||
};
|
||||
parition@fe0000 {
|
||||
label = "log";
|
||||
reg = <0xfe0000 0x020000>;
|
||||
};
|
||||
};
|
||||
|
||||
&flash_nand {
|
||||
status = "okay";
|
||||
};
|
||||
22
target/linux/ath79/dts/qca9531_glinet_gl-s200-nor.dts
Normal file
22
target/linux/ath79/dts/qca9531_glinet_gl-s200-nor.dts
Normal file
@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "qca9531_glinet_gl-s200.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "glinet,gl-s200-nor", "qca,qca9531";
|
||||
model = "GL.iNet GL-S200 (NOR)";
|
||||
};
|
||||
|
||||
&nor_partitions {
|
||||
partition@60000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x060000 0xf80000>;
|
||||
};
|
||||
partition@fe0000 {
|
||||
label = "log";
|
||||
reg = <0xfe0000 0x020000>;
|
||||
};
|
||||
};
|
||||
199
target/linux/ath79/dts/qca9531_glinet_gl-s200.dtsi
Normal file
199
target/linux/ath79/dts/qca9531_glinet_gl-s200.dtsi
Normal file
@ -0,0 +1,199 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "glinet,gl-s200", "qca,qca9531";
|
||||
model = "GL.iNet GL-S200";
|
||||
|
||||
aliases {
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&jtag_disable_pins>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
switch {
|
||||
label = "switch";
|
||||
linux,code = <KEY_SETUP>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue_led {
|
||||
label = "gl-s200:blue";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
white_led {
|
||||
label = "gl-s200:white";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
orange_led {
|
||||
label = "gl-s200:orange";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
gpio_zigbee_reset {
|
||||
gpio-export,name = "gpio1";
|
||||
gpio-export,output = <1>;
|
||||
gpio-export,direction_may_change;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_zwave_reset {
|
||||
gpio-export,name = "gpio2";
|
||||
gpio-export,output = <1>;
|
||||
gpio-export,direction_may_change;
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_zigbee_upgrade {
|
||||
gpio-export,name = "gpio11";
|
||||
gpio-export,output = <1>;
|
||||
gpio-export,direction_may_change;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_zwave_upgrade {
|
||||
gpio-export,name = "gpio17";
|
||||
gpio-export,output = <1>;
|
||||
gpio-export,direction_may_change;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
ngpios = <17>;
|
||||
gpio-line-names =
|
||||
"","reset-zigbee","reset-zwave","reset",
|
||||
"LED-orange","","","","","","",
|
||||
"upgrade-zigbee","LED-white","LED-blue",
|
||||
"switch","","","upgrade-zwave";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
nor_partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
};
|
||||
|
||||
art: partition@50000 {
|
||||
label = "art";
|
||||
reg = <0x050000 0x010000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_wan_lan: macaddr@0 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x0 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
calibration_art_1000: calibration@1000 {
|
||||
reg = <0x1000 0x440>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
flash_nand: flash@1 {
|
||||
compatible = "spi-nand";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <25000000>;
|
||||
status = "disabled";
|
||||
|
||||
nand_partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
nand_ubi: partition@0 {
|
||||
label = "ubi";
|
||||
reg = <0x000000 0x8000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_wan_lan 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_wan_lan 1>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
nvmem-cells = <&calibration_art_1000>;
|
||||
nvmem-cell-names = "calibration";
|
||||
};
|
||||
@ -203,6 +203,35 @@ define Device/glinet_gl-e750
|
||||
endef
|
||||
TARGET_DEVICES += glinet_gl-e750
|
||||
|
||||
define Device/glinet_gl-s200-common
|
||||
SOC := qca9531
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
DEVICE_MODEL := GL-S200
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb-serial-ch341
|
||||
SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
|
||||
endef
|
||||
|
||||
define Device/glinet_gl-s200-nor
|
||||
$(Device/glinet_gl-s200-common)
|
||||
DEVICE_VARIANT := NOR
|
||||
IMAGE_SIZE := 16000k
|
||||
endef
|
||||
TARGET_DEVICES += glinet_gl-s200-nor
|
||||
|
||||
define Device/glinet_gl-s200-nor-nand
|
||||
$(Device/glinet_gl-s200-common)
|
||||
DEVICE_VARIANT := NOR/NAND
|
||||
KERNEL_SIZE := 4096k
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
VID_HDR_OFFSET := 2048
|
||||
IMAGES += factory.img
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
||||
SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
|
||||
endef
|
||||
TARGET_DEVICES += glinet_gl-s200-nor-nand
|
||||
|
||||
define Device/glinet_gl-xe300
|
||||
SOC := qca9531
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
|
||||
@ -40,6 +40,8 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
|
||||
;;
|
||||
glinet,gl-s200-nor|\
|
||||
glinet,gl-s200-nor-nand|\
|
||||
netgear,pgzng1)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
|
||||
@ -20,6 +20,8 @@ platform_do_upgrade() {
|
||||
;;
|
||||
glinet,gl-ar750s-nor|\
|
||||
glinet,gl-ar750s-nor-nand|\
|
||||
glinet,gl-s200-nor|\
|
||||
glinet,gl-s200-nor-nand|\
|
||||
glinet,gl-x1200-nor|\
|
||||
glinet,gl-x1200-nor-nand)
|
||||
nand_nor_do_upgrade "$1"
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user